UQD
Standard Quick Disconnect
For server lines, CDU branches, manifolds and test setups with frequent service access.
AI Server Liquid Cooling
Quick disconnects for GPU trays, CDU lines and serviceable rack loops
This page uses only your own product images and specifications. The structure follows an engineering selection path: application, connector type, medium, flow, pressure, interface and quantity.
Product Lines
Server-focused classification by installation position and service process
This is a technical pre-selection. Final SKU, drawing and price are confirmed after interface, sealing, pressure drop, fluid and sample validation.
BMC
Blind-Mate for GPU Trays
For slide-in systems and blind-mate racks where mechanical tolerance needs to be absorbed.
BFC
Fill and Supply Blind-Mate
For CDU filling and high-flow connection points with short mating travel.
SFC
Full-Flow Ball Valve Coupling
For ring mains, main lines and CDU-near sections requiring high flow and robust isolation.
MTC / MDC
Manual Quick Disconnect
For maintenance, test benches and manual line disconnection in server environments.
MBD
Compact Connector for Tight Spaces
For compact server housings, test adapters and restricted installation spaces.
BLC
Dual-Float Blind-Mate
For dense rack geometries with smaller pitch and defined guidance.
XBMC02
Micro Blind-Mate Pair
Real specification pair from your file: M4x0.7 plug, M5x0.8 socket, EPDM, 303 stainless steel.
Project SKU
Custom Combination
When application, space or interface does not fit a standard family, a project sample is prepared.
Engineering Finder
Pre-selection by server application and technical boundary condition
This is not a final automatic SKU release. It is a clean inquiry and prequalification path that can later connect to your internal pricing table.
Preliminary selection rule
No automatic price list is shown on the public page. Prices stay in the backend and are confirmed as EUR quotations after technical review.
Send inquiryEngineering Tool
Coolant flow & connector sizing calculator
Enter the cooling load to get the required coolant flow, a recommended nominal size (DN) with matching series, plus an estimated pressure drop and fluid velocity. Results are guidance (Richtwert); the final connector is confirmed after drawing, fluid and sample / pressure-drop validation.
–Required flow (total)
–Flow per connector
–Recommended size
–Est. Δp per connector
–Fluid velocity
Based on typical Kv values per DN for water/glycol. Δp ≈ (Q/Kv)². Guidance only – final selection after sample and pressure-drop validation.
Request exact selectionSelection Matrix
Find your quick-disconnect coupling
Filter by application, then compare series by nominal size, pressure, temperature and key feature. Leak-free, >5,000 mating cycles, cleanroom assembly, ISO 9001.
| Series | Type | Application | Nominal size | Pressure | Temperature | Key feature |
|---|---|---|---|---|---|---|
| MDC | Manual drip-free QD | Data center / Semiconductor / Medical | DN04–25 | 20 bar | -40 … +120 °C | Low flow resistance, one-hand |
| MTC | Two-hand locking QD | Rail / Marine | DN05–17 | 20 bar | -40 … +120 °C | Anti-vibration, lightweight |
| UQD | OCP-standard QD | Data center | DN03–10 | 20 bar | -40 … +120 °C | OCP-compatible |
| MQD | NVIDIA-spec QD | GPU server | DN03–05 | 6.9 bar | -40 … +120 °C | Ultra-compact |
| MBT | High-flow QD | Energy storage / Supercharging | DN05–15 | 20 bar | -40 … +120 °C | High flow |
| BLC | Blind-mate | Rack / Radar | DN03–08 | 16 bar | -40 … +120 °C | ±0.5 mm float |
| BRC | Anti-contaminant blind-mate | Defense / Radar | DN03–05 | 20 bar | -40 … +80 °C | Particle-tolerant |
| UQDB | OCP blind-mate | Data center | DN03–10 | 20 bar | -40 … +120 °C | OCP blind-mate |
| MQDB | NVIDIA blind-mate | AI server | DN03–05 | 6.9 bar | -40 … +120 °C | Compact blind-mate |
| BXC | Pressure-relief blind-mate | Semiconductor / Radar | DN03–05 | 20 bar | -40 … +80 °C | Auto pressure relief |
| BMC | Large-tolerance blind-mate | OCP rack | DN05 / 10 | 20 bar | -15 … +90 °C | ±5 mm float |
| BFC | CDU refill blind-mate | CDU system | DN20 / 25 | 20 bar | -40 … +120 °C | High-flow refill |
| SAF | Two-phase QD | Two-phase cooling | DN06–09 | 40 bar | -15 … +125 °C | Refrigerant-resistant |
| MBD | Compact QD | Tight spaces | DN04 | 20 bar | -55 … +125 °C | Ultra-small footprint |
| SLC | Bayonet locking QD | Vehicle / Marine | DN03–08 | 20 bar | -40 … +120 °C | Bayonet, anti-vibration |
| SFC | Full-flow ball valve | CDU ring main | DN25–50 | 16 bar | -40 … +120 °C | Full-flow, interlocked |
Body materials 316L / aluminium / 304 SS · seals EPDM, FKM, FVMQ, NBR, HNBR (per medium & temperature). Final specification & EUR quotation after technical review.